1, Power switch box must be connected to the ground power switch box, to ensure the safety of electricity.

2, The laminating car asked for the best clean workshop to ensure the laminating effect.

3, Before laminating the equipment and laminating roller must be completely removed from the dust.

4、Laminating machine operation prohibit fingers into the two rollers in order to avoid sticking: the machine’s pressure roller temperature is high, do not touch with your hands to prevent burns;

5、 Don’t remove the door plate of the chassis when the machine is running to avoid electric shock or injury to the hands by the gears.

6、Must ensure that the total power supply is cut off when carrying out maintenance or repairing the inspection set, no maintenance or repair with electricity, the electrical system of the machine should be kept well insulated to prevent moisture. To prevent moisture, stop using the machine should cut off the power supply to prevent accidents;

7、 Maintenance or repair to disassemble the heat pipe, please be careful to hold lightly to avoid damage to the heat pipe

8、 Inspection or maintenance found under the bearing outflow of oil should be wiped away to prevent oil into other parts to affect the normal work of the machine.

9、Don’t operate more than one person when debugging equipment, the operator must ensure that no one touches the moving parts；

10、Every time you start the machine, you should wipe the dust on the surface of each roll, and check whether the surface of each roll of the machine is bright and clean, and if the machine fails or makes an abnormal sound, you should analyze it in time to find the cause and give a solution. Find the cause and give to exclude, wait for all normal machine products before you can continue to use the machine.

11、When scrubbing the machine should be a low-speed start, should be in the correct position scrubbing, strictly prevent the two rollers within the grinding drag with the hands of the cloth block.

12、Strictly prohibit the placement of any tools, devices, miscellaneous objects on the machine;

13、The newly installed machine should strengthen the lubrication of the machine, in the machine transmission break-in phase pay attention not to use the machine quickly.